FixVault
Home › Toyota › 2009 › Matrix S, AWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 3 (Engine Control System (2ZR-FE)) › Mass Air Flow Meter › Removal

Mass Air Flow Meter: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE MASS AIR FLOW METER 
    1. Disconnect the mass air flow meter connector.
    2. Remove the 2 screws and the mass air flow meter.
      Fig 1: Locating Screws And Mass Air Flow Meter
      G06008129Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault