FixVault
Home › Toyota › 2009 › Matrix XRS, Standard › Repair and Diagnosis › Engine Performance › Engine Control System (2AZ-FE) › Accelerator Pedal › Installation

Accelerator Pedal: Installation

  1. INSTALL ACCELERATOR PEDAL ASSEMBLY 
    1. Install the accelerator pedal assembly with the 2 bolts.

      2. Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the accelerator pedal assembly connector.
    Fig 1: Locating Accelerator Pedal Bolts
    G06040320Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault