Inspection Procedure

READ VALUE OF TECHSTREAM (P SPLY OFF SIGNAL)

Check the DATA LIST for proper functioning of the transmission control ECU.

Transmission control ECU

TRANSMISSION CONTROL ECU DATA LIST DESCRIPTION

Tester Display	Measurement Item / Range	Normal Condition	Diagnostic Note
P Sply OFF Prepare Rqst Sig	Power supply off preparation request signal / ON or OFF	ON: Power is turned off by power source control ECU after receiving power switch OFF signal OFF: Any other condition	-

OK : ON is displayed.

NG : REPLACE POWER SOURCE CONTROL ECU

OK : REPLACE TRANSMISSION CONTROL ECU