FixVault
Home › Toyota › 2009 › RAV4 Base, 2.5 F, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (2AR-FE) - Service Information & Circuit Tests › Accelerator Pedal Rod › Installation

Accelerator Pedal Rod: Installation

  1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY 
    1. Install the accelerator pedal sensor with the 2 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Connect the accelerator pedal sensor connector.
      Fig 1: Locating Bolts And Accelerator Pedal Sensor
      G05997183Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault