FixVault
Home › Toyota › 2009 › RAV4 Base, 2.5 F, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (2AR-FE) - Service Information & Circuit Tests › Knock Sensor › Removal

Knock Sensor: Removal

  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold (See REMOVAL ).
  2. REMOVE KNOCK SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
      Fig 1: Locating Bolt And Sensor
      G05997207Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault