FixVault
Home › Toyota › 2009 › Sequoia Limited, 5.7 W › Repair and Diagnosis › Brakes › Traction Control › Brake Control/Dynamic Control System › Skid Control Buzzer › Removal

Skid Control Buzzer: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  3. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See REMOVAL )
  6. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Detach the clamp and remove the buzzer.
    2. Disconnect the buzzer connector.
      Fig 1: Identifying Skid Control Buzzer Assembly
      G05159875Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault