Torque Specifications
2UZ-FE EMISSION CONTROL - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Air pump inlet x No. 1 air pump bracket | 8.0 | 82 | 71 in.*lbf | |
| Air pump (for Bank 2) x Body | for Bolt | 18 | 184 | 13 |
| for Nut | 12 | 122 | 9 | |
| Air pump bracket x Air pump (for Bank 1) | 10 | 102 | 7 | |
| Air pump (for Bank 1) x Cylinder block | 16 | 163 | 12 | |
| Water by-pass pipe x Rear water by-pass joint | 18 | 184 | 13 | |
| Air switching valve (for Bank 2) x Cylinder head cover | 16 | 163 | 12 | |
| No. 2 air tube x Air switching valve (for Bank 2) | 10 | 102 | 7 | |
| No. 2 air tube x Exhaust manifold | 10 | 102 | 7 | |
| No. 1 water by-pass pipe x Cylinder head cover | 18 | 184 | 13 | |
| Air switching valve (for Bank 1) x Cylinder head cover | 16 | 163 | 12 | |
| No. 3 air tube x Air switching valve (for Bank 1) | 10 | 102 | 7 | |
| No. 3 air tube x Exhaust manifold | 10 | 102 | 7 | |
| Air injection control driver assembly x Body | 8.0 | 82 | 71 in.*lbf | |
| Air injection control bracket x Air injection control bracket | 5.0 | 51 | 44 in.*lbf | |
| Air injection control driver (for Bank 1) x Air injection control bracket | 2.0 | 20 | 18 in.*lbf | |
| Air injection control driver (for Bank 2) x Air injection control bracket | 2.0 | 20 | 18 in.*lbf | |
| Charcoal canister support bracket x Charcoal canister | 5.4 | 55 | 48 in.*lbf | |
| Charcoal canister base bracket x Charcoal canister | 5.4 | 55 | 48 in.*lbf | |
| Charcoal canister x Body | 29 | 296 | 21 | |
| Fuel tank vent hose sub-assembly x Body | 29 | 296 | 21 | |
| Purge VSV x Intake manifold | 18 | 184 | 13 | |
| Ventilation valve x Cylinder head cover | 27 | 275 | 20 | |