FixVault
Home › Toyota › 2009 › Sequoia Limited, 5.7 W › Repair and Diagnosis › Suspension › Suspension Control Systems › Absorber Control Switch › Installation

Absorber Control Switch: Installation

  1. INSTALL ABSORBER CONTROL SWITCH 
    1. Engage the 2 claws to install the absorber control switch.
      NOTE: Securely engage the 2 claws.
  2. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY  (See INSTALLATION )
    Fig 1: Identifying Absorber Control Switch Claws
    G05649276Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
About FixVault