4WD Control Ecu: Installation

INSTALL 4WD CONTROL ECU
1. Install the ECU with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Connect the 2 ECU connectors.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH (See INSTALLATION )

Fig 1: Locating 4WD Control ECU Connectors Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT SIDE PANEL RH (See INSTALLATION )
INSTALL COWL SIDE TRIM BOARD RH
1. Install the cowl side trim board RH ().
  HINT:
  
  Use the same procedures described for the LH side.
INSTALL FRONT DOOR SCUFF PLATE RH
1. Install the front door scuff plate RH ().
  HINT:
  
  Use the same procedures described for the LH side.