FixVault
Home › Toyota › 2009 › Sienna CE › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control System › Terminals Of ECM

Terminals Of ECM

  1. CHECK ECM 
    Fig 1: Identifying ECM Connector Terminals
    G05140598Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    VOLTAGE SPECIFICATION

    Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
    E4-15 (STP) - E11-1 (E1) G-W - BR Stop light signal Ignition switch on, Depress brake pedal 10 to 14 V
    E4-15 (STP) - E11-1 (E1) G-W - BR Stop light signal Ignition switch on, Release brake pedal Below 1 V
    E4-16 (ST1-) - E11-1 (E1) LG-R - BR Stop light signal Ignition switch on, Depress brake pedal Below 1 V
    E4-16 (ST1-) - E11-1 (E1) LG-R - BR Stop light signal Ignition switch on, Release brake pedal 10 to 14 V
    E4-23 (TC) - E11-1 (E1) P-B - BR Terminal TC of DLC3 Ignition switch on 10 to 14 V
    E4-23 (TC) - E11-1 (E1) P-B - BR Terminal TC of DLC3 Connect terminals TC and CG of DLC3 Below 1 V
    E5-2 (CCS) - E11-1 (E1) B - BR Cruise control main switch circuit Ignition switch on 10 to 14 V
    E5-2 (CCS) - E11-1 (E1) B - BR Cruise control main switch circuit CANCEL switch ON 6.6 to 10.1 V
    E5-2 (CCS) - E11-1 (E1) B - BR Cruise control main switch circuit SET/COAST switch ON 4.5 to 7.1 V
    E5-2 (CCS) - E11-1 (E1) B - BR Cruise control main switch circuit RES/ACC switch ON 2.3 to 4.0 V
    E5-2 (CCS) - E11-1 (E1) B - BR Cruise control main switch circuit MAIN switch ON Below 1 V
About FixVault