Problem Symptoms Table
HINT:
- Before inspecting the suspected areas listed in the table below, check the fuse and relay.
- Before inspecting the suspected areas listed in the table below, check for DTCs.
- Methods used to verify the cause of the problem are listed in order of probability in the suspected area column.
Audio Function:
PROBLEM SYMPTOMS REFERENCE
| Symptom | Suspected Area | See Procedure | ||
|---|---|---|---|---|
| Pressing power switch does not turn on system. | 1. Proceed to "Pressing Power Switch does not Turn on System" | PRESSING POWER SWITCH DOES NOT TURN ON SYSTEM | ||
| 2. Radio receiver power source circuit | RADIO RECEIVER POWER SOURCE CIRCUIT | |||
| 3. AVC-LAN circuit | AVC-LAN CIRCUIT | |||
| 4. Radio receiver | RADIO RECEIVER | |||
| Panel switch does not function. | 1. Steering pad switch circuit | STEERING PAD SWITCH CIRCUIT | ||
| 2. AVC-LAN circuit | AVC-LAN CIRCUIT | |||
| 3. Radio receiver | RADIO RECEIVER | |||
| No sound can be heard from speakers. (Audio is mute.) (10 speaker system) | 1. Radio receiver power source circuit | RADIO RECEIVER POWER SOURCE CIRCUIT | ||
| 2. Proceed to "No Sound can be Heard from Speakers" | NO SOUND CAN BE HEARD FROM SPEAKERS | |||
| 3. Stereo component amplifier power source circuit | STEREO COMPONENT AMPLIFIER POWER SOURCE CIRCUIT | |||
| 4. Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier" | SOUND SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER | |||
| 5. Speaker circuit | SPEAKER CIRCUIT | |||
| 6. Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier" | MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER | |||
| 7. Proceed to "Mute Signal Circuit between Radio Receiver and Television Display Assembly" ((1)) | MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND TELEVISION DISPLAY ASSEMBLY | |||
| 8. Stereo component amplifier | STEREO COMPONENT AMPLIFIER COMMUNICATION ERROR | |||
| 9. Radio receiver | RADIO RECEIVER | |||
| No sound can be heard from speakers. (Audio is mute.) (6 speaker system) | 1. Radio receiver power source circuit | RADIO RECEIVER POWER SOURCE CIRCUIT | ||
| 2. Proceed to "No Sound can be Heard from Speakers" | NO SOUND CAN BE HEARD FROM SPEAKERS | |||
| 3. Speaker circuit | SPEAKER CIRCUIT | |||
| 4. Proceed to "Mute Signal Circuit between Radio Receiver and Television Display Assembly" ((1)) | MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND TELEVISION DISPLAY ASSEMBLY | |||
| 5. Radio receiver | RADIO RECEIVER | |||
| Sound quality is bad in all modes. (Volume is too low.) (10 speaker system) | 1. Proceed to "Poor Sound Quality in All Modes (Low Volume)" | POOR SOUND QUALITY IN ALL MODES (LOW VOLUME) | ||
| 2. Speaker circuit. | SPEAKER CIRCUIT | |||
| 3. Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier" | SOUND SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER | |||
| 4. Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier" | MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER | |||
| 5. Proceed to "Mute Signal Circuit between Radio Receiver and Television Display Assembly" ((1)) | MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND TELEVISION DISPLAY ASSEMBLY | |||
| 6. Stereo component amplifier | STEREO COMPONENT AMPLIFIER | |||
| 7. Radio receiver | RADIO RECEIVER | |||
| Sound quality is bad in all modes. (Volume is too low.) (6 speaker system) | 1. Proceed to "Poor Sound Quality in All Modes (Low Volume)" | POOR SOUND QUALITY IN ALL MODES (LOW VOLUME) | ||
| 2. Speaker circuit | SPEAKER CIRCUIT | |||
| 3. Proceed to "Mute Signal Circuit between Radio Receiver and Television Display Assembly" ((1)) | MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND TELEVISION DISPLAY ASSEMBLY | |||
| 4. Radio receiver | RADIO RECEIVER | |||
| ASL does not function. (10 speaker system) | Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter" | VEHICLE SPEED SIGNAL CIRCUIT BETWEEN STEREO COMPONENT AMPLIFIER AND COMBINATION METER | ||
| ASL does not function. (6 speaker system) | Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter" | VEHICLE SPEED SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND COMBINATION METER | ||
| RSE sound cannot be heard or sound quality is bad. ((1)) | 1. Radio receiver power source circuit | RADIO RECEIVER POWER SOURCE CIRCUIT | ||
| 2. Television display assembly power source circuit | TELEVISION DISPLAY POWER SOURCE CIRCUIT | |||
| 3. Proceed to "Sound Signal Circuit between Radio Receiver and Television Display Assembly" | SOUND SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND TELEVISION DISPLAY ASSEMBLY | |||
| 4. Proceed to "Mute Signal Circuit between Radio Receiver and Television Display Assembly" | MUTE SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND TELEVISION DISPLAY ASSEMBLY | |||
| 5. Radio receiver | RADIO RECEIVER | |||
| 6. Television display assembly | TELEVISION DISPLAY | |||
| External device sound cannot be heard or sound quality is bad. (Stereo jack is used.) | 1. Radio receiver power source circuit | RADIO RECEIVER POWER SOURCE CIRCUIT | ||
| 2. Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" | SOUND SIGNAL CIRCUIT BETWEEN RADIO RECEIVER AND STEREO JACK ADAPTER | |||
| 3. Stereo jack adapter | AUDIO TERMINAL | |||
| 4. Radio receiver | RADIO RECEIVER | |||
| Abnormal noise occurs. (10 speaker system) | 1. Proceed to "Noise occurs" | NOISE OCCURS | ||
| 2. Stereo component amplifier | STEREO COMPONENT AMPLIFIER | |||
| 3. Radio receiver | RADIO RECEIVER | |||
| Abnormal noise occurs. (6 speaker system) | 1. Proceed to "Noise occurs" | NOISE OCCURS | ||
| 2. Radio receiver | RADIO RECEIVER | |||
| Radio broadcast cannot be received or poor reception. | Proceed to "Radio Broadcast cannot be Received or Poor Reception" | RADIO BROADCAST CANNOT BE RECEIVED OR POOR RECEPTION | ||
| CD cannot be inserted/played or CD is ejected right after insertion. | 1. Radio receiver power source circuit | RADIO RECEIVER POWER SOURCE CIRCUIT | ||
| 2. Proceed to "CD cannot be Inserted/Played or CD is Ejected Right After Insertion" | CD CANNOT BE INSERTED / PLAYED OR CD IS EJECTED RIGHT AFTER INSERTION | |||
| CD cannot be ejected. | 1. Radio receiver power source circuit | RADIO RECEIVER POWER SOURCE CIRCUIT | ||
| 2. Proceed to "CD cannot be Ejected" | CD CANNOT BE EJECTED | |||
| Sound quality is bad only when CD is played. (Volume is too low.) | Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)" | SOUND QUALITY IS BAD ONLY WHEN CD IS PLAYED (VOLUME IS TOO LOW) | ||
| CD sound skips. | Proceed to "CD Sound Skips" | CD SOUND SKIPS | ||
| Radio receiver cannot be illuminated at night. | 1. Illumination circuit | ILLUMINATION CIRCUIT | ||
| 2. Radio receiver | RADIO RECEIVER | |||
|
||||
Steering Pad Switch Function:
PROBLEM SYMPTOMS REFERENCE
| Symptom | Suspected Area | See Procedure |
|---|---|---|
| Audio system cannot be operated with steering pad switch. | 1. Steering pad switch circuit | STEERING PAD SWITCH CIRCUIT |
| 2. Radio receiver | RADIO RECEIVER | |
| Steering pad switch cannot be illuminated at night. | 1. Illumination circuit | ILLUMINATION CIRCUIT |
| 2. Radio receiver | RADIO RECEIVER |
"Bluetooth" Function (*2):
PROBLEM SYMPTOMS REFERENCE
| Symptom | Suspected Area | See Procedure |
|---|---|---|
| Cellular phone registration failure, phone directory transfer failure. | Proceed to "Cellular Phone Registration Failure, Phone Directory Transfer Failure" | CELLULAR PHONE REGISTRATION FAILURE, PHONE DIRECTORY TRANSFER FAILURE |
| Cellular phone cannot send / receive. | 1. Proceed to "Cellular Phone cannot Send / Receive" | CELLULAR PHONE CANNOT SEND / RECEIVE |
| 2. Steering pad switch circuit | STEERING PAD SWITCH CIRCUIT | |
| 3. Radio receiver | RADIO RECEIVER | |
| The other callers voice cannot be heard, is too quiet, or distorted. | 1. Proceed to "The Other Callers Voice cannot Heard, is too Quiet, or Distorted" | THE OTHER CALLER'S VOICE CANNOT BE HEARD, IS TOO QUIET, OR DISTORTED |
| 2. Proceed to "Cellular Phone Voice Circuit between Radio Receiver and Stereo Component Amplifier" | CELLULAR PHONE VOICE CIRCUIT BETWEEN RADIO RECEIVER AND STEREO COMPONENT AMPLIFIER | |
| 3. Radio receiver | RADIO RECEIVER | |
| 4. Stereo component amplifier | STEREO COMPONENT AMPLIFIER | |
| The other caller cannot hear your voice, or your voice is too quiet or distorted. | 1. Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted" | THE OTHER CALLER CANNOT HEAR YOUR VOICE, OR YOUR VOICE IS TOO QUIET OR DISTORTED |
| 2. Proceed to "Microphone Circuit between Microphone and Radio Receiver" | MICROPHONE CIRCUIT BETWEEN MICROPHONE AND RADIO RECEIVER | |
| 3. Microphone | - | |
| 4. Radio receiver | RADIO RECEIVER |
*2: 10 Speaker System