FixVault
Home › Toyota › 2009 › Sienna CE › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - System & Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation › Accelerator Pedal Rod › Removal

Accelerator Pedal Rod: Removal

  1. REMOVE ACCELERATOR PEDAL ROD 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 nuts and accelerator pedal rod.
      3. Fig 1: Locating Accelerator Pedal Rod And Nuts
      G05136385Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault