FixVault
Home › Toyota › 2009 › Sienna CE › Repair and Diagnosis › Suspension › Wheel Alignment › Suspension System › Front Shock Absorber With Coil Spring › Disassembly

Front Shock Absorber With Coil Spring: Disassembly

  1. FIX FRONT SHOCK ABSORBER WITH COIL SPRING 
    1. Install 2 nuts and a bolt to the bracket at the lower side of the front shock absorber with coil spring and secure it in a vise.
  2. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH 
    1. Using SST, compress the front coil spring LH.

      SST 09727-30021(09727-00010,09727-00021, 09727-00031) 

      NOTE: Do not use an impact wrench. It will damage the SST.

      HINT:

      Use 2 SST of the same type.

      Fig 1: Removing Front Suspension Support Sub-Assembly LH Using SST
      G05139405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the lock nut and the front suspension support sub-assembly.
  3. REMOVE FRONT SUSPENSION SUPPORT LH BEARING 
  4. REMOVE FRONT COIL SPRING SEAT UPPER LH 
  5. REMOVE FRONT COIL SPRING INSULATOR UPPER LH 
  6. REMOVE FRONT COIL SPRING LH 
  7. REMOVE FRONT SPRING BUMPER LH. 
  8. REMOVE FRONT COIL SPRING INSULATOR LOWER LH 
  9. REMOVE SHOCK ABSORBER ASSEMBLY FRONT LH 
About FixVault