Torque Specifications
WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Clutch pedal stopper bolt x Lock nut | 25 | 250 | 18 | |
| Clutch master cylinder push rod clevis lock nut | 12 | 120 | 9 | |
| Clutch pedal sub-assembly x Clutch pedal support | 37 | 375 | 27 | |
| Clutch pedal switch assembly x Clutch pedal support | 16 | 160 | 12 | |
| Clutch switch assembly x Clutch pedal support | 16 | 160 | 12 | |
| Clutch pedal support x Body | 24 | 241 | 17 | |
| Clutch master cylinder x Clutch pedal support | 13 | 130 | 9 | |
| Clutch line x Clutch master cylinder | 14 (15) | 143 (155) | 10 (11) | |
| Clutch line clamp x Clutch release cylinder (for C59) | 12 | 120 | 9 | |
| Clutch tube bracket x Manual transaxle (for C59) | 12 | 122 | 9 | |
| Clutch line bracket x Manual transaxle (for C59) | 8.0 | 82 | 71 in.*lbf | |
| Release cylinder bleeder plug x Clutch release cylinder | 8.4 | 86 | 74 in.*lbf | |
| Clutch release cylinder x Manual transaxle case | 12 | 120 | 9 | |
| Clutch line x Clutch release cylinder | 14 (15) | 143 (155) | 10 (11) | |
| Clutch cover assembly x Flywheel sub-assembly | 19 | 195 | 14 | |
| Release fork support x Manual transaxle (for C59) | 37 | 375 | 27 | |
| Release fork support x Manual transaxle (for E351) | 47 | 480 | 35 | |
| Clutch accumulator bracket x Clutch accumulator (for E351) | 12 | 120 | 9 | |
| Clutch accumulator bracket x Starter assembly (for E351) | 37 | 377 | 27 | |
| Clutch tube bracket x Manual transaxle case (for E351) | 8.0 | 80 | 69 in.*lbf | |
| Clutch accumulator assembly x Clutch line | 14 (15) | 143 (155) | 10 (11) | |
| Release cylinder heat insulator x Release cylinder assembly (for E351) | 12 | 120 | 9 | |
| Clutch accumulator assembly x Release cylinder assembly (for E351) | 12 | 120 | 9 | |
(): For use without union nut wrench