Radio Receiver: Installation

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL RADIO RECEIVER ASSEMBLY

Fig 1: Locating No. 1 Radio Bracket Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 RADIO BRACKET
1. Install the No. 1 radio bracket with the 4 screws.
Fig 2: Locating No. 1 Radio Bracket Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 RADIO BRACKET
1. Install the No. 2 radio bracket with the 4 screws.
INSTALL RADIO RECEIVER WITH BRACKET
1. Connect each connector.
  
  Fig 3: Locating No. 2 Radio Bracket Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 4 clips.
  
  Fig 4: Identifying Radio Receiver Bracket Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the radio receiver with bracket with the 4 bolts.
INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH (See INSTALLATION )
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH (See INSTALLATION )

Fig 5: Locating Radio Receiver Bracket Bolts