FixVault
Home › Toyota › 2009 › Tacoma Base, 4D Pickup, Automatic › Repair and Diagnosis › Brakes › Traction Control › Brake Control › VSC Off Switch › Inspection

VSC Off Switch: Inspection

  1. INSPECT VSC OFF SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

    Standard resistance 

    STANDARD RESISTANCE REFERENCE

    Tester Connection Switch Condition Specified Condition
    3 - 4 Pressed Below 1 Ω
    Not pressed 10 kΩ or higher

    If the value is not as specified, replace the VSC off switch.

    Fig 1: Identifying VSC off Switch
    G06083779Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault