FixVault
Home › Toyota › 2009 › Tacoma X-Runner › Repair and Diagnosis › Engine Performance › Engine Control System (1GR-FE) › SFI System › DTC P0111 Intake Air Temperature Sensor Gradient Too High › Inspection Procedure

Inspection Procedure

  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111) 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain/Engine and ECT/Trouble Codes.
    5. Read DTCs.

      Result 

      RESULT REFERENCE

      Result Proceed to
      P0111 and other DTCs A
      P0111 B

      HINT:

      If any DTCs other than P0111 are output, troubleshoot those DTCs first.

      B: REPLACE MASS AIR FLOW METER  (See MASS AIR FLOW METER  )

      A:  GO TO DTC CHART 

About FixVault