FixVault
Home › Toyota › 2009 › Tundra Base, 4.7 T, RWD › Repair and Diagnosis › Brakes › Traction Control › Brake Control › VSC Off Switch › Removal

VSC Off Switch: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab)  (See REMOVAL )
  2. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax)  (See )
  3. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See REMOVAL )
  5. REMOVE VSC OFF SWITCH 
    1. Disconnect the VSC OFF switch connector.
    2. Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the lower instrument panel finish panel LH.
      Fig 1: Detaching Claws Using Screwdriver
      G05159879Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault