FixVault
Home › Toyota › 2009 › Venza 2.7 E, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (1AR-FE) - System Testing, Removal & Installation › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    1. Disconnect the accelerator pedal sensor assembly connector.
    2. Remove the 2 bolts and accelerator pedal sensor assembly.
      NOTE:
      • Avoid physical shocks to the accelerator pedal sensor assembly.
      • Do not disassemble the accelerator pedal sensor assembly.
        Fig 1: Locating Bolts And Accelerator Pedal Sensor Assembly
        G06023444Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault