FixVault
Home › Toyota › 2009 › Venza 2.7 E, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (1AR-FE) - System Testing, Removal & Installation › Mass Air Flow Meter › Removal

Mass Air Flow Meter: Removal

  1. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY 
    1. Disconnect the mass air flow meter connector.
    2. Remove the 2 screws and mass air flow meter.
      Fig 1: Locating Screws And Mass Air Flow Meter
      G06023447Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault