Throttle Body: Inspection
- INSPECT THROTTLE BODY ASSEMBLY Text in Illustration ILLUSTRATION LEGEND
*1 Component without harness connected (Throttle Body) - Check that the throttle valve opens and closes smoothly.
- Check that there is no sludge accumulating around the throttle body.
- Measure the resistance according to the value (s) in the table below.
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Condition Specified Condition 1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω If the result is not as specified, replace the throttle body assembly.