Knock Sensor: Installation

INSTALL KNOCK CONTROL SENSOR
1. Install the 2 knock control sensors with the 2 bolts as shown in the illustration.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
  
  NOTE: Make sure that each knock control sensor is in the correct position.
2. Connect the 2 knock control sensor connectors.
  
  Fig 1: Identifying Knock Control Sensors With Bolts Torque Angle
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INTAKE MANIFOLD
1. Install the intake manifold (See INSTALLATION ).