FixVault
Home › Toyota › 2009 › Yaris Base, 4D Hatchback › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control Main Switch › Inspection

Cruise Control Main Switch: Inspection

  1. INSPECT CRUISE CONTROL MAIN SWITCH 
    Fig 1: Inspecting Cruise Control Main Switch
    G04831005Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance and check the results in accordance the value(s) in the table below.

      Standard resistance 

      CRUISE CONTROL MAIN SWITCH

      Tester Connection Switch Condition Specified Condition
      1(ECC) - 3(CCS) Neutral 10 kΩ or higher
      1(ECC) - 3(CCS) +RES 235 to 245 Ω
      1(ECC) - 3(CCS) -SET 617 to 643 Ω
      1(ECC) - 3(CCS) CANCEL 1509 to 1571 Ω
      1(ECC) - 3(CCS) Main Switch off 10 kΩ or higher
      1(ECC) - 3(CCS) Main Switch on Below 1 Ω

      If the result is not as specified, replace the cruise control main switch.

About FixVault