Problem Symptoms Table
HINT:
Use the table below to help determine the causes of the problem symptom. The potential cases of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Cruise Control System
PROBLEM SYMPTOMS TABLE
| Symptom | Suspected area |
|---|---|
| Main switch cannot be turned ON (Indicator light on the combination meter does not come on) | see CRUISE CONTROL SWITCH CIRCUIT |
| see CRUISE MAIN INDICATOR LIGHT CIRCUIT | |
| ECM | |
| Desired speed cannot be set (Indicator light on the combination meter comes on when the main switch is turned ON, but goes off when operating the "SET" function) | see CRUISE CONTROL SWITCH CIRCUIT |
| ECM | |
| Desired speed cannot be set (Indicator light on the combination comes on when the main switch is turned ON and it remains ON, while operating the "SET" function) | see CRUISE CONTROL SWITCH CIRCUIT |
| see STOP LIGHT SWITCH CIRCUIT | |
| see CLUTCH SWITCH CIRCUIT *1 | |
| Park/neutral position switch circuit *2 (see HOW TO PROCEED WITH TROUBLESHOOTING ) |
|
| see CLUTCH SWITCH CIRCUIT *1 | |
| Combination meter system (see HOW TO PROCEED WITH TROUBLESHOOTING ) |
|
| see VEHICLE SPEED SENSOR CIRCUIT | |
| ECM | |
| While cruise control driving, the set speed is canceled (Indicator light remains ON) | see CRUISE CONTROL SWITCH CIRCUIT |
| see VEHICLE SPEED SENSOR CIRCUIT | |
| see STOP LIGHT SWITCH CIRCUIT | |
| Combination meter system (see HOW TO PROCEED WITH TROUBLESHOOTING ) |
|
| see CLUTCH SWITCH CIRCUIT *1 | |
| Park/neutral position switch circuit *2 (see HOW TO PROCEED WITH TROUBLESHOOTING ) |
|
| ECM | |
| Hunting occurs (Speed is not constant) | see VEHICLE SPEED SENSOR CIRCUIT |
| ECM | |
| Speed setting cannot be canceled ("CANCEL" function failure only) | see CRUISE CONTROL SWITCH CIRCUIT |
| ECM | |
| The CRUISE main indicator light remains blinking | see DLC3 CIRCUIT |
| ECM | |
| Cruise control cannot be canceled when vehicle speed decreases to below low speed limit | see VEHICLE SPEED SENSOR CIRCUIT |
| ECM | |
| Cruise control cannot be canceled when brake pedal is depressed | see STOP LIGHT SWITCH CIRCUIT |
| ECM | |
| Cruise control cannot be canceled when shift lever is operated*2 | Park/neutral position switch circuit *2 (see HOW TO PROCEED WITH TROUBLESHOOTING ) |
| ECM | |
| Cruise control cannot be canceled when clutch pedal is depressed*1 | see CLUTCH SWITCH CIRCUIT *1 |
| ECM | |
| The SET indicator light does not illuminate (SET function operates normally) | see Cruise SET Indicator Light Circuit |
| ECM | |
| *1: for Manual Transaxle *2: for Automatic Transaxle |
|