Fog Light Assembly: Adjustment
WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
- ADJUST FOG LIGHT AIM
- Prepare the vehicle by performing the following.
- Ensure there is no damage or deformation to the body around the headlights.
- Fill the fuel tank.
- Make sure that the oil is filled to the specified level.
- Make sure that the coolant is filled to the specified level.
- Inflate the tires to the appropriate pressure (see TIRE AND WHEEL SYSTEM ).
- Place the spare tire, tools, and jack in their original position.
- Unload the trunk.
- Sit a person of average weight (68 kg (150 lbs)) in the driver's seat.
- Start the engine and let it idle.
- From underneath the vehicle, turn the screw to perform the adjustment.
HINT:
- The light moves up when turning the screw clockwise, and moves down when turning the screw counterclockwise.
- When adjusting the fog light, insert a screwdriver into the front fender liner fog light service hole.
- Prepare the vehicle by performing the following.