License Plate Light Assembly: Removal

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH and LH sides.
The procedures listed below are for the LH side.

REMOVE BACK DOOR TRIM BOARD ASSEMBLY (See DISASSEMBLY )
REMOVE BACK DOOR OUTSIDE GARNISH SUBASSEMBLY (See REMOVAL )
REMOVE LICENSE PLATE LIGHT ASSEMBLY
1. Remove the light as shown in Fig 1.
2. Disconnect the connector.
3. Remove the bulb/socket unit from the light.
4. Remove the bulb from the socket.
  
  Fig 1: Removing License Plate Light Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002