FixVault

Stop Light Control Relay: Removal

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (See  REMOVAL  ) 
  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See  REMOVAL  ) 
  3. REMOVE STOP LIGHT CONTROL RELAY ASSEMBLY 
    1. Disconnect the clamp.
    2. Disconnect the connector to remove the stop light control relay assembly.
      Fig 1: Removing Stop Light Control Relay Assembly
      G00483059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002