Front Shock Absorber With Coil Spring: Disposal

DISPOSE OF FRONT SHOCK ABSORBER
1. Fully extend the shock absorber piston rod, and fix it at an angle in a vise or similar tool.
2. Using a drill or similar tool, slowly make a hole in the area (A-B) shown in Fig 1 to discharge the gas inside.
  NOTE:
  - The gas is colorless, odorless and harmless.
  - Since the discharging gas may cause chips to scatter, cover the drill with a shop rag or piece of cloth when making the hole.
    
    Fig 1: Identifying Shock Absorber Disposal Dimensions
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002