FixVault
Home › Toyota › 2010 › FJ Cruiser RWD › Repair and Diagnosis › Brakes › Traction Control › Brake Control System (Service Information) › VSC Off Switch › Removal › Removal

VSC Off Switch: Removal: Removal

  1. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY  . Refer toREMOVAL - Step 19
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)  . Refer toREMOVAL - Step 20
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)  . Refer toREMOVAL - Step 21
  4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY  . Refer toREMOVAL - Step 22
  5. REMOVE BOX BOTTOM MAT  . Refer toREMOVAL - Step 23
  6. REMOVE FRONT CONSOLE BOX  . Refer toREMOVAL - Step 24
  7. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY  . Refer toREMOVAL - Step 26
  8. REMOVE VSC OFF SWITCH 
    1. Disconnect the VSC off switch connector.
    2. Disengage the 2 claws and remove the VSC off switch.
      Fig 1: Identifying VSC Off Switch, Connector & Claws
      GTY181955Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault