FixVault
Home › Toyota › 2010 › Matrix Base, Standard › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control System (Service Information) › Clutch Switch › Installation › Installation

Clutch Switch: Installation: Installation

  1. INSTALL CLUTCH SWITCH (CRUISE CONTROL CANCEL SWITCH ASSEMBLY) 
    1. Temporarily install the clutch switch (cruise control cancel switch assembly) with the nut.
      Fig 1: Locating Clutch Switch Connector And Pin
      GTY236694Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the pin and tighten the nut.

      Torque: 16 N*m (160 kgf*cm, 12 ft.*lbf) 

    3. Connect the connector.
About FixVault