FixVault
Home › Toyota › 2010 › Matrix Base, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (2ZR-FE) (Service Information) › Accelerator Pedal › Removal › Removal

Accelerator Pedal: Removal: Removal

  1. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    1. Disconnect the accelerator pedal position sensor connector.
      Fig 1: Locating Accelerator Pedal Position Sensor Connector And Bolts
      GTY235752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and accelerator pedal.
About FixVault