FixVault
Home › Toyota › 2010 › Prius PHV › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) (PHV) › Knock Sensor › Removal › Removal

Knock Sensor: Removal: Removal

  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer toREMOVAL .
  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
    2. Remove the bolt and remove the knock sensor.
      Fig 1: Identifying Knock Sensor, Connector & Bolt
      GTY227208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault