FixVault
Home › Toyota › 2010 › Prius PHV › Repair and Diagnosis › External Pages › Different variant/trim › Section 118 (Smart Key System (Entry Function) (Diagnostics - Introduction) (Except PHV)) › SMART KEY SYSTEM (for Entry Function) › DTC Check/Clear › DTC Check/Clear

DTC Check/Clear

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART .
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical/Smart Key/Trouble Codes.
    5. Clear the DTCs.
About FixVault