FixVault
Home › Toyota › 2010 › RAV4 Base, 3.5 K, AWD › Repair and Diagnosis (Single Page) › Engine Performance › Engine Control Systems › Engine Control System (2GR-FE) (Service Information) › Mass Air Flow Meter › Installation › Installation

Mass Air Flow Meter: Installation: Installation

  1. INSTALL MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.
      Fig 1: Locating Mass Air Flow Meter Screws
      GTY224969Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Make sure that the O-ring is not cracked or jammed when installing it.

    2. Connect the mass air flow meter connector.
  2. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL 
About FixVault