FixVault
Home › Toyota › 2010 › Sequoia Limited, 5.7 W › Repair and Diagnosis › Brakes › Traction Control › Brake Control / Dynamic Control Systems (Service Information) › VSC Off Switch › Installation › Installation

VSC Off Switch: Installation: Installation

  1. INSTALL TRACTION CONTROL SWITCH 
    Fig 1: Identifying Traction Control Switch And Claws
    GTY233190Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Engage the 2 claws to install the traction control switch.
      NOTE:

      Securely engage the 2 claws.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  . Refer to INSTALLATION - Step 56
  3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 2
  4. INSTALL INSTRUMENT SIDE PANEL LH  . Refer to INSTALLATION - Step 58
  5. INSTALL COWL SIDE TRIM BOARD LH  . Refer to INSTALLATION - Step 46
  6. INSTALL FRONT DOOR SCUFF PLATE LH  . Refer to INSTALLATION - Step 48
About FixVault