FixVault
Home › Toyota › 2010 › Tundra Base, 4.6 M, 4WD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (1UR-FE) (Service Information) › VVT Sensor › Removal › Removal

VVT Sensor: Removal: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 8
  2. REMOVE AIR CLEANER HOSE ASSEMBLY  . Refer to REMOVAL - Step 9
  3. REMOVE VVT SENSOR 
    1. Disconnect the 4 sensor connectors.
      Fig 1: Locating VVT Sensor Bolts & Connectors
      GTY188998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts and 4 sensors.
About FixVault