FixVault
Home › Toyota › 2010 › Tundra Base, 4.6 M, RWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (1UR-FE) (Service Information) › Accelerator Pedal › Removal › Removal

Accelerator Pedal: Removal: Removal

  1. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the accelerator pedal position sensor connector.
      Fig 1: Locating Accelerator Pedal Position Sensor Connector
      GTY189483Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and accelerator pedal rod.
About FixVault