FixVault
Home › Toyota › 2010 › Tundra Base, 4.6 M, RWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (1UR-FE) (Service Information) › Mass Air Flow Meter › Installation › Installation

Mass Air Flow Meter: Installation: Installation

  1. INSTALL MASS AIR FLOW METER 
    1. Install the MAF meter with the 2 screws.
      Fig 1: Locating MAF Meter Screws
      GTY123763Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 1.7 N*m (17 kgf*cm, 15 in.*lbf) 

    2. Connect the MAF connector.
About FixVault