Downhill Assist Control Switch: Inspection: Inspection

CHECK DOWNHILL ASSIST CONTROL SWITCH

Measure the resistance according to the value(s) in the table below.

Fig 1: Checking Downhill Assist Control Switch

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard Resistance

Tester Connection	Switch Condition	Specified Condition
1 (E) - 4 (+B2)	Pressed	Below 1 Ω
1 (E) - 4 (+B2)	Not pressed	10 kΩ or higher

TEXT IN ILLUSTRATION

*a	Component without harness connected (Downhill Assist Control Switch)

If the result is not as specified, replace the downhill assist control switch.