FixVault
Home › Toyota › 2011 › Land Cruiser › Repair and Diagnosis › Brakes › Anti-Lock Brakes › Brake Control / Dynamic Control Systems (Service Information) › Crawl Switch › Installation › Installation

Crawl Switch: Installation: Installation

  1. INSTALL CRAWL SWITCH 
    1. Attach the 4 claws to install the suspension control switch (CRAWL switch).
      Fig 1: Locating Suspension Control Switch
      GTY228324Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 45
  3. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY  . Refer to INSTALLATION - Step 46
  4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 47
  5. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 48
  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  . Refer to INSTALLATION - Step 49
  7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH  . Refer to INSTALLATION - Step 50
  8. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION  . Refer to INSTALLATION - Step 51
  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH  . Refer to INSTALLATION - Step 52
  10. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION  . Refer to INSTALLATION - Step 53
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
About FixVault