FixVault
Home › Toyota › 2011 › Land Cruiser › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Camshaft Position Sensor › Removal › Removal

Camshaft Position Sensor: Removal: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 22
  2. REMOVE AIR CLEANER HOSE ASSEMBLY  . Refer to REMOVAL - Step 8
  3. REMOVE CAMSHAFT POSITION SENSOR 
    Fig 1: Locating Camshaft Position Sensor Bolt
    GTY139970Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
  4. REMOVE VVT SENSOR 
    1. Disconnect the 4 sensor connectors.
      Fig 2: Locating VVT Sensor Bolts
      GTY147690Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts and 4 sensors.
About FixVault