FixVault
Home › Toyota › 2011 › Matrix Base, Standard › Repair and Diagnosis (Single Page) › External Pages › Different variant/trim › Section 35 (Transfer Case (Service Information)) › 4WD Control Ecu › Installation › Installation

4WD Control Ecu: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL 4WD CONTROL ECU 
    Fig 1: Remove/Install 4WD Control ECU Bolts
    GTY244703Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the ECU with the 2 bolts.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

    2. Connect the connector.
  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  . Refer to INSTALLATION - Step 4
About FixVault