Ignition Switch: Installation: Installation

INSTALL IGNITION SWITCH ASSEMBLY
1. Install the ignition switch with the 2 screws.
  
  Fig 1: Remove/Install Ignition Switch Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
  
  Fig 2: View Of Ignition Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL UPPER STEERING COLUMN COVER . Refer to INSTALLATION - Step 12
INSTALL LOWER STEERING COLUMN COVER . Refer to INSTALLATION - Step 13
ADJUST SPIRAL CABLE . Refer to INSTALLATION - Step 23
INSTALL STEERING WHEEL ASSEMBLY
Refer to INSTALLATION
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSPECT STEERING PAD . Refer to INSTALLATION - Step 5
CALIBRATE TORQUE SENSOR ZERO POINT
Refer to CALIBRATION
INSPECT SRS WARNING LIGHT
Refer to DIAGNOSIS SYSTEM