FixVault
Home › Toyota › 2011 › Prius › Repair and Diagnosis (Single Page) › Engine Performance › Engine Control Systems › Emission Control System (Service Information) › Purge Valve › Removal › Removal

Purge Valve: Removal: Removal

  1. REMOVE NO. 2 CYLINDER HEAD COVER  . Refer to REMOVAL - Step 29
  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  . Refer to REMOVAL - Step 4
  3. REMOVE INLET AIR CLEANER ASSEMBLY  . Refer to REMOVAL - Step 5
  4. REMOVE AIR CLEANER CASE  . Refer to REMOVAL - Step 6
  5. REMOVE VACUUM SWITCHING VALVE ASSEMBLY 
    1. Disconnect the connector and 2 fuel vapor feed hoses.
      Fig 1: Identifying Fuel Vapor Feed Hoses & Connector
      GTY221533Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and vacuum switching valve assembly.
      Fig 2: Identifying Switching Valve Assembly
      GTY221173Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault