DTC B2313: Glass Position Initialization Incomplete: Procedure

1. Turn the ignition switch ON and initialize the power window regulator motor (on the driver side). Refer to INITIALIZATION .
2. Turn the ignition switch OFF.
3. Wait for at least 10 seconds, and then turn the ignition switch ON.
4. Check whether the DTC output recurs.
   RESULT
   
   

   Display (DTC Output)	Proceed to
   B2313	A
   No output	B

B → END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED) 

A → REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side)