FixVault
Home › Toyota › 2011 › RAV4 Limited, 2.5 F, FWD › Repair and Diagnosis › Brakes › Traction Control › Brake Control System (Service Information) › Downhill Assist Control Switch › Installation › Installation

Downhill Assist Control Switch: Installation: Installation

  1. INSTALL DOWNHILL ASSIST CONTROL SWITCH 
    1. Attach the 2 claws to install the switch.
      Fig 1: Installing Downhill Assist Control Switch
      GTY221726Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 SWITCH HOLE BASE 
    1. Install the No. 1 switch hole base. Refer to INSTALLATION .
About FixVault