Rear Speed Sensor: Installation: Installation

INSTALL REAR SPEED SENSOR

Fig 1: Locating Rear Speed Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the rear speed sensor with the nut.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  NOTE:
  Make sure that the sensor tip is clean.
2. Connect the speed sensor connector.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
CHECK VSC SENSOR SIGNAL (for Hydraulic Brake Booster)
Refer to TEST MODE PROCEDURE
CHECK VSC SENSOR SIGNAL (for Vacuum Brake Booster)
Refer to TEST MODE PROCEDURE
CHECK ABS SENSOR SIGNAL (w/o VSC)
Refer to TEST MODE PROCEDURE