FixVault
Home › Toyota › 2011 › Tundra Base, 5.7 Y, 4WD › Repair and Diagnosis › Brakes › Traction Control › Brake Control System (Service Information) › Steering Angle Sensor › Installation › Installation

Steering Angle Sensor: Installation: Installation

  1. INSTALL STEERING ANGLE SENSOR  . Refer to INSTALLATION - Step 1
  2. INSTALL SPIRAL CABLE SUB-ASSEMBLY  . Refer to INSTALLATION - Step 1
  3. INSTALL UPPER STEERING COLUMN COVER  . Refer to INSTALLATION - Step 14
  4. INSTALL LOWER STEERING COLUMN COVER  . Refer to INSTALLATION - Step 15
  5. ADJUST SPIRAL CABLE  . Refer to INSTALLATION - Step 4
  6. INSTALL STEERING WHEEL ASSEMBLY  . Refer to INSTALLATION - Step 16
  7. INSTALL STEERING PAD  . Refer to INSTALLATION - Step 6
  8. INSTALL LOWER NO. 3 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 3
  9. INSTALL LOWER NO. 2 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 4
  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  11. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light, refer to DIAGNOSIS SYSTEM .
About FixVault