FixVault
Home › Toyota › 2011 › Yaris 2D Hatchback, Standard › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Accelerator Pedal › Removal › Removal

Accelerator Pedal: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    Fig 1: Identifying Accelerator Pedal With Bolts
    GTY237196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the accelerator pedal connector.
    2. Remove the 2 bolts and the accelerator pedal.
      NOTE:
      • Do not drop or strike the accelerator pedal.
      • Do not disassemble the accelerator pedal.
About FixVault