VSC Off Switch: Inspection: Inspection

INSPECT VSC OFF SWITCH

Measure the resistance according to the value(s) in the table below.

Fig 1: VSC Off Switch Connector Terminal Identification

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*1	VSC OFF Switch

Standard Resistance

Tester Connection	Switch Condition	Specified Condition
6 - 9	Released	10 kΩ or higher
6 - 9	Pushed in	Below 1 Ω

If the result is not as specified, replace the VSC OFF switch.

Check the illumination operation.

Apply battery voltage to the VSC OFF switch and check that the illumination comes on.

Measurement Condition	Specified Condition
Battery positive (+) → 8 Battery negative (-) → 7	Illumination comes on

If the result is not as specified, replace the VSC OFF switch.